How to open the port (NAT Port) Wifi Tenda Router F3 series

Today I will share with you how to open the port (Nat port) of Wifi Tenda Router F3 dual band and similar lines

Step 1: Sign in to Tenda Modem

• Sign in to your modem by opening a web browser and typing http://192.168.0.1 (default or optional). It will appear the interface of the modem and ask to log in.
• The default account and password of this modem are usually written on the stamp below the modem. The default is: admin /admin

Step 2: Open the Port

After logging into the modem, go to Advanced -> Port Forwarding

• Internal IP: enter the IP address that needs NAT, This example NAT port of Camera has IP: 192.168.0.119
• Internal Port: The internal port of the device that needs NAT out. This example is port: 8081
• External Port: The external port needs to be open for the signal to enter. This example is port: 8081
• Protocol: Both
• Action: Click the + sign to add a port
• Then click OK to save the open port configuration

Step 3: Check port opening results

• By going to the following ping.eu page, select Port Check.

• The browser will redirect to another page where you do the following:

• Click on the number after the words Your IP is
• In the IP address or host name box, that number will appear
• In the Port Number box, enter the ports you have opened. click Go.
• If the result as shown above is that you have succeeded On the contrary, as shown below, you have not succeeded, it is necessary to check the steps above.

Thank you for following cctvit.net article!