Today I will share with you how to open the port (Nat port) of Netis N5VNrouter and similar lines
Contents
Step 1: Log in to Netis N5VN Router
- Log on to your modem by opening your web browser and typing http://192.168.1.1 (default or optional). It will appear the router’s interface and ask to log in. Then go to Advanced
Step 2: Proceed to nat port
- Description: As you please, set
- Internal Host IP Address: enter the IP address that needs NAT, This example NAT port of Camera has IP: 192.168.1.250
- Protocol: ALL
- External Port Range: The internal port of the device that requires NAT out. This example is port: 37777
- Internal Port Range: The outer port needs to be open for the signal to enter. This example is port: 37777
- Then click ADD to save the open port configuration
Step 3: Check port opening results
- By going to the following ping.eu page, select Port Check.
![](https://cctvapp.net/wp-content/uploads/2021/06/5-1156509j17715.png)
- The browser will redirect to another page where you do the following:
![](https://cctvapp.net/wp-content/uploads/2021/06/6-1156511j17715.png)
- Click on the number after the words Your IP is
- In the IP address or host name box, that number will appear
- In the Port Number box, enter the ports you have opened. click Go.
- If the result as shown above is that you have succeeded On the contrary, as shown below, you have not succeeded, it is necessary to check the steps above.
![](https://cctvapp.net/wp-content/uploads/2021/06/7-1156512j17715.png)
Thank you for following cctvit.net article!