Today I will share with you how to open the port (Nat port) of Asus RT-AC1200G+ Wifi Modem in a simple way that anyone can do
Contents
Step 1: Log in to Asus RT-AC1200G+ Modem
- Log on to your modem by opening your web browser and typing http://192.168.1.1 (default or optional). It will appear the interface of the modem and ask to log in.
- The default account and password of this modem are usually written on the stamp below the modem. The default is: admin /admin
Step 2: Open the Port
After logging into the modem, go to Wan -> Virtual Server/Port Porwarding
- Service Name: Name as you please
- Port Range: The outer port needs to be open for the signal to enter. This example is port: 8181
- Local IP: enter the IP address that needs to be NAT, This example NAT port of Camera has IP: 192.168.10.16
- Local Port: The internal port of the device that needs NAT out. This example is port: 8181
- Portocol: TCP or ALL
- Then click Apply to save the open port configuration.
Step 3: Check port opening results
- By going to the following ping.eu page, select Port Check.
![](https://cctvapp.net/wp-content/uploads/2021/06/5-1156509j17715.png)
- The browser will redirect to another page where you do the following:
![](https://cctvapp.net/wp-content/uploads/2021/06/6-1156511j17715.png)
- Click on the number after the words Your IP is
- In the IP address or host name box, that number will appear
- In the Port Number box, enter the ports you have opened. click Go.
- If the result as shown above is that you have succeeded On the contrary, as shown below, you have not succeeded, it is necessary to check the steps above.
![](https://cctvapp.net/wp-content/uploads/2021/06/7-1156512j17715.png)
Thank you for following cctvit.net article!