Instructions for opening port (NAT Port) Smart Router Ruijie RG-EG105G-P

Today I will share with you how to open the port (Nat port) Smart Router Ruijie RG-EG105G-P similar lines of Ruijie

Step 1: Log in to Ruijie RG-EG105G-P Router

Log on to your modem by opening your web browser and typing (default or optional). It will appear the router’s interface and ask to log in.

Step 2: Proceed to Nat port

Go to Home-> More -> Advanced -> Port Mapping then select Add

Next enter the IP address and Port of the device you want to open Port, here I for example enter the following information:
  • Name: As you please, set
  • Preferred Sever: Custom
  • Protocol: TCP
  • External IP Address: Outbound Interface – All WAN Ports
  • External Port/Range: Enter the port to be nat, e.g. 37777
  • Internal IP Address: enter the IP address that needs NAT, This example NAT port of Camera has IP:
  • Internal Port/Range: Enter the local port to be nat, e.g. 37777
  • Then click OK to save the open port configuration

Step 3: Check port opening results

After opening the port. You need to check if your port has opened or not.
  • By going to the following page, select Port Check.
  • The browser will redirect to another page where you do the following:
  • Click on the number after the words Your IP is
  • In the IP address or host name box, that number will appear
  • In the Port Number box, enter the ports you have opened. click Go.
  • If the result as shown above is that you have succeeded On the contrary, as shown below, you have not succeeded, it is necessary to check the steps above.

Thank you for following article – good luck!

Leave a Reply

Your email address will not be published. Required fields are marked *